Ads 468x60px




25 April 2012

How to Flash Your Gigablue with Openmips

A simple guide how to flash the new Openmips and the new Boot Loader

1-important to use empty stick!
2-in case of first installation use this bootloader (choose the version of your box)
3-after "done" is displayed, take the USB stick out, delete everything from stick, box off, and put the latest image incl. folder Gigablue for (SE, SOLO, UE) on your stick. plug in stick, power on.
4- After 2-3 Min. you will see "Giga" resp. E2, and you can go on with settings, network etc.

1 comment: